Check the Light Tower Generator and its associated equipment:
Ensure that the generator and its ancillary equipment are clean and in good condition, and all fasteners, gearbox, clutch, governor, oil level, etc. are in good condition. Check if the protective railing covers of the flywheel and generator are intact.
Inspection of lubrication system for Light Tower Generator:
Check if the engine oil is sufficient and if the oil quality is qualified. The oil page should be located in the middle of the oil dipstick scale line, and the oil cap should be closed. For new machines or generators that have not been used for a long time, it is necessary to add an appropriate amount of oil according to the instructions.
Light Tower Generator cooling system inspection:
Ensure that the cooling water pressure and temperature are normal. Check the capacity of the coolant tank and replenish it if necessary.
Electrical system inspection:
Check whether the insulation resistance of the generator and its ancillary equipment meets the requirements. Ensure that all electrical equipment is well grounded and free from electrical leakage. Turn on the battery switch (it should be turned off when the machine is not running to prevent battery depletion).
Light Tower Generator startup system check:
Check if the battery voltage is sufficient, if the battery connection is secure, and if there are no short circuits. For diesel generators, it is necessary to loosen the exhaust screw and continuously press the manual oil pump to remove air from the oil circuit.
Light Tower Generator Exhaust System Inspection:
Ensure that the exhaust pipe is unobstructed and there are no leaks. Pay attention to preventing sudden fires when working and operating exhaust pipes near areas with flammable materials.
Fuel preparation:
Prepare an appropriate amount of fuel based on the type of generator (gasoline or diesel). When refueling, the generator should be kept in a stopped state, and smoking and fuel spillage are strictly prohibited in the vicinity. Do not add fuel to a hot or running generator.
Installation and fixation:
Place the generator lighting equipment at a balanced location and secure it firmly by stepping on the brake device of the swivel wheel to prevent the lighting equipment from slipping away. For mobile lighting lighthouses, it is necessary to install lamp posts, lamp head components, etc., and connect the corresponding cable joints.
Safety precautions for Light Tower Generator:
Do not smoke while operating the machine. The generator set should have good grounding to prevent accidents from occurring. Do not use the generator in enclosed rooms or damp environments to avoid accidents. Lighting lighthouses should not operate machines indoors unless there is sufficient ventilation equipment.
