The operation of the whole home power generator involves electrical safety and equipment maintenance, and correct operation is crucial. The following are key precautions, explained in points:
1、 Principles for Safe Use of Whole Home Power Generator
Indoor use strictly prohibited
The whole home power generator generates carbon monoxide during operation and should be used outdoors with good ventilation, away from doors, windows, garages, or ventilation openings to prevent exhaust gases from entering the room.
Anti electric shock measures
Ensure that the generator casing is well grounded. Avoid operating in humid environments and use rain covers if necessary (but ensure ventilation).
Anti reverse power transmission
Do not directly connect the generator to the household circuit! It needs to be connected through a professional transfer switch or isolation transformer to avoid current backflow to the power grid, which may endanger the safety of maintenance personnel.
2、 Preparation before operating the whole home power generator
Check fuel and engine oil
Gasoline generators require the use of fresh unleaded gasoline. Check the oil level and replenish it if it is insufficient, but avoid excess.
Confirm load power
Calculate the total power of the equipment to be powered (starting power needs to be considered separately), and do not operate beyond the load. Start high-power appliances (such as air conditioners and refrigerators) in stages to avoid excessive instantaneous current.
Placement and Connection
Place the generator steadily to avoid tilting and causing fuel leakage. Use insulated cables and plugs to connect equipment, and the cables should match the power (being too thin can cause overheating).
3、 Whole Home Power Generator Operation and Monitoring
Start up and preheating
Turn off non essential loads before starting, preheat for 2-3 minutes after starting, and gradually connect the equipment. If multiple attempts fail to start, there should be at least a 10 second interval to prevent damage to the fireproof plug.
Operation Monitoring
Regularly check the fuel level, oil pressure, and whether the cooling fan is running. Stop the machine immediately for inspection in case of abnormal noise, smoke or burnt smell.
Refueling precautions
The engine must be turned off and cooled before refueling to avoid sparks causing fires. Do not spill fuel on the casing or high-temperature components, and keep away from sources of ignition when refueling.
4、 Maintenance and Storage of Whole Home Power Generator
regular maintenance
Change the engine oil every 20-30 hours or once a month (whichever comes first). Clean the air filter element and replace it if necessary; Check the spark plug gap.
Long term storage
Empty the fuel tank. Start the engine until the fuel is depleted to prevent carburetor corrosion. Store in a dry and dust-free environment, avoiding extreme temperatures.
Read the instruction manual before use, as different brands and models of whole home power generators may have special requirements. If unsure of the operation, it is recommended to contact professional personnel for installation or maintenance.
