When storing a workplace generator, the following precautions should be taken to ensure the safety, performance, and usage time of the generator.
1、 Workite generator storage environment
Worksite generator dry and ventilated: The environment where the generator is stored should be kept dry and ventilated, avoiding moisture and high temperatures. Excessive humidity may cause rusting of internal parts of the generator, while high temperatures may accelerate the aging of rubber and plastic components.
Suitable temperature: The storage environment should be kept between -40 ℃ and 65 ℃ without condensation. Avoid sudden changes in vibration, temperature, or humidity.
Clean and dust-free: The storage area should be kept clean to prevent dust and debris from entering the interior of the generator. At the same time, it is necessary to stay away from items that produce corrosive gases and vapors such as acidic and alkaline substances to prevent chemical corrosion.
Rain and sun protection: If the generator is stored outdoors, it should be covered with a rain cover or canvas to prevent rain and sun exposure. At the same time, ensure that the bottom of the generator is not less than 0.3 meters above the ground to prevent water immersion on the ground.
2、 Worksite generator status
Empty fuel tank: If the generator is not used for a long time, the diesel in the fuel tank should be emptied to prevent diesel deterioration and microbial growth, which may cause damage to the engine.
Change engine oil: Before storage, the engine oil and oil filter should be changed to ensure that the interior of the engine is clean. At the same time, an appropriate amount of rust inhibitor can be added to improve the long-term rust protection effect of the engine.
Disconnect fuel: Disconnect the engine fuel supply and exhaust pipes from the fuel source of the equipment to prevent fuel leakage.
Drain coolant: If the engine uses long-lasting coolant with rust inhibitor added, there is no need to drain the coolant within 24 months. But if the engine has been stored for more than 24 months, the engine cooling system must be drained and rinsed with appropriate solvents or hot light mineral oil.
Rust prevention treatment: Apply a layer of rust proof oil on the surface of the metal parts of the generator to prevent rusting. For unassembled engines and generators, protective oil must be applied to the flywheel, flywheel housing, and all other unpainted machined surfaces.
Battery maintenance: Remove the battery, clean the oxide from the joint, and apply Vaseline.
3、 Workplace generator security measures
Sealed openings: During storage, all openings of the generator should be sealed to prevent dust and debris from entering.
Warning setting: Set up clear warning labels on the generator, indicating not to run the engine, not to turn the crankshaft, and other information.
Equipping with fire-fighting equipment: The storage area should be equipped with fire-fighting equipment to cope with possible emergencies such as fires.
4、 Regular inspection of Worksite Generator
Appearance inspection: Regularly inspect the appearance of the generator to ensure that there is no damage, rust, oil leakage, or other phenomena.
Internal inspection of construction site generators: At regular intervals (such as monthly or quarterly), the generator should be started and run for a period of time to check the operation of its internal components. At the same time, check whether the oil and coolant levels are normal, and supplement or replace them if necessary.
5、 Other precautions for construction site generators
Avoid vibration: When storing the generator, it should be protected from vibration or impact to prevent damage to internal components.
Secure: If the generator is stored on a mobile trailer or trailer, it should be securely fixed to prevent damage during transportation.
Compliance with regulations: When storing and using generators, local regulations and safety rules should be strictly followed to ensure the safety of personnel and equipment.
By implementing the above measures, the safety and performance of the workplace generator during storage can be protected, and its usage time can be extended.
More information on Worksite Generator:http://www.soufadianji.com/
