When using Weifang generator sets in low-temperature environments, attention should be paid to the following aspects to ensure their normal operation and extend their service life.
1、 Fuel selection and storage for Weifang generator sets
Fuel selection: Due to the tendency of diesel to solidify in low-temperature environments, it is recommended to choose low pour point diesel fuel to prevent the fuel from solidifying in the fuel tank or pipeline, which may affect the start-up and operation of the generator set.
Storage management: When storing diesel, attention should be paid to preventing water from entering the fuel tank to avoid diesel contamination. At the same time, regularly cleaning the fuel tank and replacing the fuel filter are also key steps to ensure fuel cleanliness.
2、 Maintenance of cooling system for Weifang generator set
Coolant concentration: Ensure that the coolant concentration in the cooling system is appropriate to prevent freezing or low temperatures in low-temperature environments.
Sealing and smoothness: Regularly check the sealing and smoothness of the cooling system to prevent coolant leakage or blockage, which may affect the heat dissipation effect of the generator set.
3、 Battery management
Electrolyte concentration: Regularly check the electrolyte concentration of the battery to ensure it is within the normal range, in order to ensure the normal operation of the battery.
Electrode plate connection: Check whether the connection between the electrode plates is firm to avoid poor contact or open circuit.
Battery cleaning: Keep the battery clean and regularly clean the dust and dirt on the surface of the battery to improve its heat dissipation and performance.
Charging or replacement: Charge or replace the battery as necessary to ensure that it can continuously provide stable power support to the generator set.
4、 Weifang generator set engine preheating
Preheating time: Before starting the generator set, it should be preheated according to the manufacturer's recommended preheating time to ensure that the engine can work normally after starting. The preheating time usually depends on the ambient temperature and engine model.
Preheating method: Electric heating, fuel heating, or water heating can be used for preheating, and the specific method should be selected according to the actual situation of the generator set.
5、 Regular inspection and maintenance of Weifang generator sets
Filter replacement: Regularly replace the air filter, fuel filter, oil and oil filter to prevent impurities and pollutants from entering the interior of the generator set and affecting its normal operation.
Check the connection: Check whether the connection between the transmission system and the electrical system is firm to avoid loosening or detachment.
Clean up dust accumulation: After shutdown, inspect and maintain the generator, clean up dust accumulation, and maintain the cleanliness and heat dissipation effect of the generator set.
6、 Weifang generator set full operation and fault handling
Safe operation: When operating the generator set, one should follow the safety operation procedures, wear protective equipment, and ensure personal safety.
Fault handling: When a fault or abnormal situation is found in the generator set, it should be stopped immediately and professional personnel should be contacted for maintenance. Avoid continuing to operate in a faulty state to avoid exacerbating the severity of the fault or causing greater losses.
In summary, when using Weifang generator sets in low-temperature environments, attention should be paid to fuel selection and storage, cooling system maintenance, battery management, engine preheating, regular inspection and maintenance, as well as safe operation and fault handling. By proper operation and maintenance, the safety and efficiency of the generator set can be improved, ensuring stable operation of the equipment in harsh environments.
More information on Weifang generator sets:http://www.soufadianji.com/
