1、 Huaquan Generator Environmental Temperature Management
The temperature in spring is variable, so it is important to maintain a balance between warmth and heat dissipation when using a generator set. Ensure good ventilation in the computer room to avoid overheating of the generator set due to high temperatures.
Choose the appropriate local coolant temperature. When the temperature of the surrounding environment of the generator set is less than 10 ℃, insulation measures should be taken.
2、 Huaquan Generator Cooling Water Management
The temperature gradually rises in spring, so be careful not to drain the cooling water too early. It should be run at idle speed before turning off the engine. Wait until the cooling water temperature drops below 60 ℃ and the water is not hot to the touch before turning off the engine and draining it to avoid damage to the engine due to high temperature.
3、 Fixed installation and vibration reduction of Huaquan generator
Ensure the fixed installation of the generator set is stable, using a concrete foundation. The depth and range of the foundation are determined by the weight and external dimensions of the unit.
If fixed installation is not carried out, shock-absorbing pads with good damping effect should be used under the chassis to prevent excessive vibration.
4、 Maintenance and upkeep of Huaquan generator
Spring is a transitional season, and maintenance of the generator set should be strengthened by regularly checking the engine oil, fuel, air filters, etc., to ensure smooth operation of the unit.
Check for leaks at the crankshaft seal, oil pan, oil filter, oil passage plug, oil pressure sensor, and valve cover and other components.
5、 Huaquan generator battery inspection
There is a large temperature difference in spring, so it is necessary to regularly check the battery level and electrolyte to ensure the reliability of the starting system. The dilute hydrochloric acid lithium battery electrolyte of lead-acid batteries is toxic and corrosive, and can cause burns when touched on the skin. It should be washed immediately with cold water.
6、 Huaquan Generator Electrical Safety
The power engineering of the generator set entering the public route must go through ATS to ensure isolation from voltage.
The generator set must be reliably grounded, and specialized tools for insulation layers must be used for repairing energized equipment. In wet and cold environments, attention should be paid to the risk of electric shock accidents.
Comply with all electrical requirements, and the installation and maintenance of the electrical parts of the equipment must be carried out by qualified technical and professional electrical personnel.
7、 Lightning protection and moisture prevention
Spring is a season with frequent winds and lightning, so it is necessary to inspect the lightning protection facilities of the generator set to ensure its safe operation during thunderstorm weather.
In spring, the humidity is high, so attention should be paid to the moisture-proof measures of the generator set to avoid damage to electrical components caused by moisture.
Huaquan generator need to pay attention to multiple aspects when used in spring to ensure the safe and stable operation of the unit.
More information on Huaquan generators:
http://www.soufadianji.com/
